Because our previous 3 microcontrollers were crached, we decided to make another board. This time with true hole components, because we had not the time to make another print. A picture of the print can you see below:
The schedule is lightly different then our PCB. This because the atmega328 PU we are using has 28 pins instead of 32 on the smd atmega328 we were using. On the smd atmega are 2 more analog channels, one more ground and one more VCC. Also we changed the clock to 16 MHz, this to avoid our problems with burning a boatloader on it. The rest of the schedule is the same as that of the prints we made before.
the schedule for the microcontroller:
In the message that guillaime posted earlier, he explains how to burn a bootloader and configure the microcontroller.
greets
Stef
Geen opmerkingen:
Een reactie posten